BTW Wireless BT Clip-On Mic The Saramonic BTW is an extremely compact clip-on Bluetooth microphone for very easy-to-use wireless audio to computers, smartphones, tablets, and other Bluetooth devices. It features an Omnidirectional microphone capsule which delivers natural and consistent vocal sound, even when you are moving or turn your head. The BTW features active noise reduction to eliminate background noise and distractions. It also features of 3.5mm TRRS headphone port to monitor in real-time wirelessly and allows for use with TRRS headsets and microphones. Compact and Easy-to-Use with a Natural Vocal Sound, Without Distractions The BTW is extremely easy-to-use, wirelessly connect it to your device with Bluetooth, open your app, and start working. It clips to your shirt or collar with either the included slide-on clip, or with its integrated magnetic clip. It features an omnidirectional polar pattern which provides a natural vocal sound when seated, while moving, and even when you turn your head. It also features active noise reduction which eliminates distracting background noise, making it easy for the sound to focus on you and not distractions. Ideal for Virtual Meetings, Online Classes, Recording or Video Apps and More The BTW is an ideal solution for virtual meetings and online classes, giving you crystal-clear sound and allowing you to move freely without sacrificing being heard. It’s also ideal for audio recording and video apps, giving you an inexpensive and flexible wireless microphone for numerous applications. Freedom to Move with Power for Hours with Remarkable Range and Run-Time The Saramonic BTW features a remarkable 262-feet (80m) of operating range (line-of-sight), giving you freedom of movement while still getting great sound. It also features up to 10-hour battery life, allowing you to work all day on one charge. Versatile 3.5mm TRRS Port for Headphones and TRRS Microphones or Headsets The BTW features a 3.5mm TRRS Headphone port, allowing you to plug-in the included earbud or wired TRS headphones to monitor your audio in real time, or hear others clearly and discretely in virtual meetings, on-line classes and more as you move freely. Because it’s a TRRS headphone port, it also allows you to plug in your favorite headset microphones or lavalier and go wireless to your device with ease. Specs Transmission Type: 2.4GHz wireless transmission Modulation: GFSK Polar Pattern: Omnidirectional Sensitivity: -42dB (0dB=1/ubar at 1KHz) RF Output Power: <10dBm Operating Range: 80m Line-of-Sight Maximum SPL: 120dB SPL Power Requirement: Built-in Li-ion Battery Charging Port: USB Type-C Battery Life: 10 hours Antenna: Built-in Antenna Audio Connector: 3.5mm TRRS Headphone Connector Operating Temperature Range: 0℃~50℃ Storage Temperature Range: -20℃~55℃ Size: 2.66 x 1.68 x 0.72” (67.6 × 42.6 × 18.4mm) Weight: 0.86oz (24.5g) ITEM INCLUDES 1 x BTW Wireless Lavalier Microphone 1 x USB-A to USB-C Charging Cable 1 x Furry Windscreen 1 x Slide-On Belt Clip 1 x Mini Earbud Earphone 1 x User Manual 1 x Warranty Card

Description Reviews (0) Blink900 B2S Blink900 B2S dual-channel 2.4GHz wireless microphone system is a brand new wireless microphone system from Saramonic which has the potential to redefine the industry. Built with the new DSP technology, Blink900 B2S delivers incredible crystal clear sound with 6ms ultra-low latency at distances of up to 200m. Built with dual-channel, it offers you more recording solutions, you can use single or dual transmitters, and can choose mono or stereo mode to record each channel separately for ultimate flexibility in post-production. Features – Advanced 2.4GHz wireless transmission technology – Compatible with cameras, mobile devices and more – Clip-on transmitter with built-in Omnidirectional microphone – Dual-channel receiver with 3.5mm output – High resolution and easy-to-use LCD display – Auto brightness adjustment & auto gain control – Low cut filter (160Hz/120Hz/80Hz) – 3.5mm headphone jack for real-time monitoring – Built-in rechargeable battery provides up to 6-hour runtime – Selectable mono and stereo output – Operating range of up to 200m Specifications Blink900 TX Mic Capsule:4mm Built-in Capsule Polar Pattern:Omnidirectional Transmission Type:2.4GHz Digital Frequency Frequency Response:20-20KHz Maximum SPL:100 dB SPL (1kHz @ 1m) dBu SNR:> 80dB Sampling Rate:48kHz Bit Rate:24bit Distortion:≤0.1% Audio Input Connector:3.5mm TRS MIC/LINE IN Jack Operating Range:Up to 200m (without obstacle) Power Requirements:Built-in Battery (400mAh) Built-in Battery Life:6 hours Antenna:Built-in PIFA Antenna Weight:33.6g (1.19oz) Dimensions:43.5×43.5×16.4mm Blink900 RX Transmission Type:2.4GHz Digital Frequency Operating Range:Up to 200m (without obstacle) Frequency Response:20-20kHz Maximum SPL:100 dB SPL (1kHz @ 1m) dBu SNR:> 80dB Sampling Rate:48kHz Bit Rate:24bit Distortion:≤0.1% Audio Output Connector:3.5mm Headphone Jack / 3.5mm TRS Line Out Jack Power Requirements:Built-in Battery (450mAh) Built-in Battery Life:6 hours (working with two transmitters) Antenna:Built-in PIFA Antenna Weight:35.3g (1.25oz) Dimensions:46x46x16.4mm Packing List Carrying Pouch × 1 Blink900 B2S RX Receiver × 1 Blink900 B2S TX Transmitter × 2 USB-C Charging Cable × 3 Fur Windshield for Built-inMicrophone × 2 3.5mm TRS to TRS Output Cablefor Came

Blink 500 B6 2.4 GHz 2-Person Wireless Clip-On Microphone System The Saramonic Blink 500 B6 is an incredibly compact, lightweight, and professional sounding two-person wireless microphone system that was made to be used with mobile devices that have USB-C ports, like Android smartphones or tablets, computers, and more. The two included transmitters are small enough to clip directly to shirt collars, and the included RXUC receiver is so lightweight and unobtrusive that it can easily be used in handheld gimbals. The Blink 500 B6 makes using multiple wireless microphones as easy as possible and it provides broadcast-quality sound in a package that’s incredibly compact and lightweight. Tiny body, huge sound. The versatile sub-compact wireless transmitters that come with the Blink 500 B6 have excellent sounding built-in microphones that capture voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld. They also operate as traditional bodypack transmitters with the included SR-M1 omnidirectional clip-on lavalier microphones, providing an even more professional and inconspicuous miking solution. The impossibly compact RXUC dual-receiver plugs directly into the USB-C port of your device and it doesn’t require any batteries or charging to operate. There are no controls to fuss with, either. You just plug it in, and it works. So advanced, it’s effortless. Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B6 is so technically advanced that it couldn’t be easier to use. Even though there are very few controls to adjust, behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitters to the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot. Perfect levels and power. One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That’s why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and an intelligent LED display shows you where they’re set. The internal Lithium batteries get 5 hours of life from a charge, and the USB-C charging ports can be used to power or recharge the transmitter in the field with portable USB battery packs. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces. Handheld gimbal, meet wireless sound. Handheld gimbals have the amazing ability to deliver cinematically smooth video footage that makes it feel like the camera is floating, but one area where they suffer is audio. It’s simply too difficult to attach external microphones or wireless receivers without throwing off the balance of the device. The RXUC included in your Blink 500 B6 kit changes this story. It’s small and lightweight enough to remain mounted to your device and won’t interfere with the motors or arm of your gimbal. You can finally capture perfect sound with your mobile gimbal footage with the fantastic ability to put wireless mics on two separate people. An ideal wireless system. Even if you shoot video with a mobile phone or tablet, wireless microphones are still completely essential tools for video production, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get—yet it still delivers professional quality sound—makes it ideal for filmmakers, journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won’t slow them down. If you shoot video with a mobile device and a handheld gimbal, this is the best solution available for perfect sound from wireless transmitters. This system is small enough to tuck away in a small pocket, so you can effortlessly bring it with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility. Specifications Transmitter Frequency: 2.4GHz Oscillator Type: Gaussian Frequency-Shift Keying (GFSK) RF Frequency Band: 2400 to 2483.5 MHz RF Output Power: 10 mW Signal to Noise Ratio: ≥70dB Voice Delay: ≤6ms Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation) Audio Gain Control: 11dB, 18dB, 25dB Plug-In Power: Yes, 1V Distortion: ≤0.1% Digital Resolution: 24-bit / 48kHz Frequency Response: 20Hz to 16kHz Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area Max Number of Simultaneous Systems: 18 (up to 36 Microphones) Antenna: Built-in 1/4λ Wire Antenna Buttons: On / Off / Pair, Volume Up, Volume Down Battery: Built-in Li-ion 3.7V / 400mAh Approx. Battery Life: 5 hours Charging Connector: USB Type-C (1.5 hours to be fully charged) Input: 1/8” (3.5mm) Microphone Input Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED: Flashing when Charging / Off when Charge Finished Microphone: Built-In Pressure Operated Electret Condenser Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier) Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier) Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier) Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier) Mounting Clip: Built-In Operating Temperature: 0℃ to 50℃ Storage Temperature: -20℃ to +50℃ Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm) Weight: 1.2 oz (34g) Receiver Frequency: 2.4GHz Oscillator type: Gaussian Frequency-Shift Keying (GFSK) RF Frequency Band: 2400 to 2483.5 MHz Signal to Noise Ratio: ≥70dB Voice Delay: ≤6ms Distortion: ≤0.1% Digital Resolution: 24-bit / 48kHz Frequency Response: 20Hz to 16kHz Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area Antenna: Built-in 1/4λ Wire Antenna Connector: USB-C Male Button: Pairing Pinhole Button Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX Operating temperature: 0℃ to 50℃ Storage temperature: -20℃ to +50℃ Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm) Weight: 0.35 oz (10g)

Blink 500 Pro B8 4-Person Wireless 2.4GHz Clip-On Microphone System for Cameras & Mobile Devices The Saramonic Blink 500 Pro B8 is a compact and lightweight 4-channel 2.4GHz wireless clip-on microphones system that delivers broadcast-quality sound of 4-people to cameras, smartphones, tablets, computers, recorders, and much more. It includes four incredibly discrete clip-on mic transmitters with furry windscreens, and a single camera-mountable receiver. The receiver comes with both TRS and TRRS output cables and easily slides into the shoe mount of a camera, or you can clip it to a smartphone, tablet, or even a camera strap. Allowing you to easily record four people wirelessly to nearly any device. Finally, a 4-Person Wireless System, and its Remarkably Easy-to-Use The Blink 500 Pro B8 is an ideal solution for users who need a simple to use 4-person wireless system with a single camera-mountable receiver. Whether you are recording multi-person interviews to your camera, live streaming a panel discussion with a smartphone, recording a multi-guest podcast into a tablet, or having your team join an online meeting on a laptop, you can finally have 4-people miked up with ease. Just power on, connect the receiver, clip a mic on your subjects, and go. It’s just that easy. Incredibly Compact, Lightweight, and Very Discrete Clip-On Microphones The Blink500 Pro B8 system has four TXS clip-on transmitters with a high-quality built-in omnidirectional microphone. At less than 2.5 x 0.5” and only half an ounce, they’re small and light enough to clip to shirts or clothing with ease, versatile enough to place on a table or podium, and even pass around to use handheld. They feature tactile 6-step gain control to dial in perfect levels for each subject, and a soft-touch mute if your subject needs privacy. Each TXS transmitter also includes a press-on high-wind furry windscreen to protect against wind gusts outdoors and pops and sibilance indoors. Compact 4-Channel Camera-Mountable Receiver with 3.5mm Headphone Out The Blink500 Pro 4RX receiver is small and lightweight, but there is big power in this small camera-mountable receiver. It includes 2x Output cables a 3.5mm TRS Y cable for cameras, recorders, mixers, and more, and a 3.5mm TRRS Y cable for Smartphones, Tablets, and Computers with a 3.5mm TRRS headphone port. Easily pair the TRRS cable with a Lightning or USB-C dongle (sold separately) for devices without a 3.5mm headphone port. Its 3.5mm headphone output with level control allows you to monitor the sound in real-time, especially vital if your camera or device lacks a headphone output. It also features a vivid OLED display that shows you the RX’s battery life and headphone level, and each transmitters’ level meter with just a glance. Two 3.5mm Outputs to Mix, Split, or Record Each Mic Separately for Maximum Flexibility The Blink 500 Pro B8’s 4RX receiver features two 3.5mm TRS outputs that work seamlessly with either the included TRS and TRRS Y cables in Mono mode, mixing all four mics together. With the TRS Y cable you can split the two mics from A1/B1 to the Left and two mics from A2/B2 to the Right in Stereo mode. Switch the receiver to 4-Track Mode Stereo and add the optional SR-C2019 Dual 3.5mm TRS Male to Four 3.5mm TRS Male Cable, or the optional SR-C2019 Dual 3.5mm TRS Male to Four XLR Male Cable (both sold separately) to record each mic separately to multi-channel recorders, mixers, and more. Features – Four-channel wireless microphone receiver – Professional-quality built-in omnidirectional microphone – Compatible with Blink500 Pro TXS/ TX – Easy-to-read OLED displays – Selectable mono and stereo mode – Selectable mute function – Remarkable 8-hours of run time for receiver – Monitoring sound by 3.5mm headphone output – Up to 164′ (50m) operating range Specifications Transmission Type:2.4GHz Digital Frequency Modulation:GFSK Operating Range:Up to 50m (164’) (Without Obstacle) RF Output Power:< 10mW Polar Pattern:Omnidirectional Frequency Response:50Hz-18kHz Maximum SPL:120dB SPL Sensitivity:-39dB Audio Output Level:-60dBV ~ -20dBV SNR:TXS:>78dB / 4RX:>80dB Audio Output Channel:4 Channels Audio Output Connector:4RX:3.5mm Headphone Jack 3.5mm TRS Line Output Jack Power Requirements:Built-in Li-ion Battery or USB-C DC 5V Built-in Battery Life:TXS:Approx.4 hours / 4RX:Approx.8 hours Antenna:PIFA Weight:TXS:Approx. 17g (0.59oz) / 4RX:Approx. 50g (1.76oz) Dimensions:TXS:61x20x14mm (2.4×0.78×0.55”) / 4RX:66x49x21mm (2.60×1.93×0.83”) Operating Temperature:0℃ to 50℃ Storage Temperature:–20℃ to 55℃ Packing List Blink500 Pro TXS Transmitter x 4 Blink500 Pro 4RX Receiver x 1 USB-C Charging Cable x 5 Fur Windshield x 4 Dual 3.5mm TRS to 3.5mm TRS Y-Cable for Camera x 1

Harness the Freedom of Wireless The Wireless GO II features RØDE’s state-of-the-art Series IV digital transmission to deliver incredibly stable and clear wireless audio at a ranges up to 200m (line of sight), even in dense RF environments like offices, malls, busy streets and universities. Incredible Versatility With its 3.5mm analog and USB-C digital outputs, the Wireless GO II can record two individual channels of audio to DSLR and mirrorless cameras, iOS and Android phones and tablets, and Mac and Windows computers. A wireless microphone system that adapts to your needs. Safe and Sound The Wireless GO II’s flexible gain control and safety channel ensure you can get perfect levels recorded to your camera, even if your subject suddenly gets louder, and with each transmitter featuring on-board recording, you’ll still have a backup of your audio even if you go out of range. Pocket-sized Professional Audio The Wireless GO II transmitters and receiver weigh less than 32g each and take up virtually no space in a camera kit bag, backpack, handbag or briefcase. With their uniquely compact form factor and innovative clip design, it’s incredibly easy to mount on clothing, camera cold shoes, boom poles or mobile camera rigs. RØDE Connect is a free podcasting and streaming software solution that is now compatible for use with the Wireless GO II. RODE Connect makes it easier to record or stream with professional-quality audio from your computer. RØDE Connect allows up to four physical guests, with two Wireless GO II’s, to be connected to a single computer. It features an intuitive, easy-to-use interface inspired by the RØDECaster Pro. RØDE Central is an easy-to-use desktop and mobile companion app for the Wireless GO II that allows you to configure your device settings anywhere, unlock advanced features, optimise and export recordings (desktop only), access device information, and update to the latest firmware. Download it for free to unlock the full potential of your Wireless GO II. Wireless GO II User Guide The Wireless GO II User Guide explains everything you need to know about using your Wireless GO II and capturing incredible sound. This comprehensive guide covers everything from getting started and learning how to use your device through to configuring and unlocking advanced features with the companion app RØDE Central. Wireless GO II Single The Wireless GO II is also available in a single set. Offering the same ultra-compact form factor and unmatched feature set as the original, but with just one transmitter instead of two, it’s the ultimate wireless microphone for solo content creators. The receiver in the single set is identical to the dual-channel edition, meaning an additional transmitter can easily be paired for dual-channel recording.

BOYA BY-DM200 Plug&Play Microphone for iPhone Mic Superb Sound for Recording Video Livestream Description BOYA BY-DM200 Plug&Play Microphone with Lightning Plug for iPhone Mic Superb Sound for Recording Video Livestream Compact Plug&PlayMicrophone BOYA BY-DM200 is a professional compact condenser microphone which can plug directly into an Apple & iOS device. With Lightning Port Phone Mics With lightning connector, it can support below equipments: – for all iPhone X, iPhone 8/8 Plus, iPhone 7/7 Plus, iPhone SE, iPhone 6s/6s Plus, iPhone 6/6 Plus, iPhone 5c, iPhone 5s, iPhone 5 – iPad mini 4, iPad mini 3, iPad mini 2, iPad mini, iPad Pro, iPad (2017), iPad Air 2, iPad Air – iPod Nano (7th generation), iPod touch 6, iPod touch 5 – And more. Portable & Easy to use It is a good choice for recording, Vlog, Video Making, Broadcasting etc, and will greatly improve the sound performance while recording music, video and speech etc. Specifications: Audio output connector: for Apple MFI certified connector AD conversion: Multibit DeltaSigma Pick up pattern: Cardioid Frequency response: 25-20KHz Sensitivity: -38+/-3dB (@1KHz , 0dB=1v/Pa) Signal to noise ratio: 80dB Power Requirements: Powered by iOS devices Item Dimension: 67*38*38 mm / 2.6*1.4*1.4 inch Features: Transducer type: Electret Condense Cardioid polar pattern Plug and play. Portable and easy-to-use Improved sensitivity & signal-to-noise 24-bit/96kHz converter Compatible with iOS devices: iPad, iPhone, iPod touch for Apple MFI certified Lightning connector Included foam windscreen, fur windshield and carrying pouch