Out of stock

The LANCOOL 216 is a mainstream case that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimized for air cooling or water cooling. It includes 2 x 160mm and 1 x 140mm pre-installed PWM fans and an innovative rear PCIe fan bracket to maximize airflow. – Mid-tower chassis configurable for air cooling and water cooling – Airflow optimized front, top and PSU shroud side mesh panels – Equipped with 2 x front 160 PWM fans (ARGB or non-RGB) and 1 x rear 140mm PWM fan – Supports 360 radiator at the top, front and a maximum of 10 fans – Includes rear PCIe fan bracket – Front I/O that can be relocated to the bottom – Extensive cable management solution CONTINUOUS FRONT TO TOP MESH To ensure adequate airflow is provided to the system, the LANCOOL 216 features mesh at the front, top, and on the PSU shroud’s side*. The front mesh extends to the top for a continuous mesh panel. LANCOOL 216 RGB FANS The included 160mm ARGB fans feature two channels of LEDs (one on the outer rim of the fan, another at the shaft of the fan blades) that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5V 3pin header. AIR COOLING MODE / WATER COOLING MODE The modular motherboard I/O allow users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems. FRONT I/O CAN BE RELOCATED Including a power button, reset button, audio port, 2x USB3.0 ports, and a USB Type C port, the front I/O module can be relocated to the lower left side of the front panel. HARDWARE COMPATIBILITY The LANCOOL 216 supports ATX, Micro-ATX, MINI-ITX motherboards, and E-ATX under 280mm in width (when the grommet bar is flipped 180°). In addition, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected. LATEST GEN. GPU READY With enough room for graphics cards up to 392mm in length, and 180mm in height (for air cooling mode), the LANCOOL 216 is compatible with even the largest NVIDIA 4000 series cards. PRESSURE LEAK FREE Pre-installed at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing smaller than a 360 radiator/3x120mm fans at the top. REMOVEABLE TOP RADIATOR BRACKET The top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance. PCIE FAN BRACKET The GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the GPU and a greater intake/exhaust balance for the system. STORAGE UP TO 6 x SSD + 2 X HDD STORAGE CAPACITY A total of 2 x 3.5” + 6 x 2.5” drives can be installed with dedicated mounts for storage. CABLE MANAGEMENT The LANCOOL 216 offers multiple options for easy cable management. Along the cable grommet bar, 3 large velcro straps can hold 2 different sets of cables. 3 small clips are located along the rear side panel, ideal for cleanly routing the CPU 8pin cable, and 2 additional velcro straps are located near the PSU chamber to help hold down the extra PSU cable length away from the ventilation path in the bottom chamber. DUST FILTER For users who take dust management to the next level, a magnetic front panel dust filter is available as an optional accessory. The dust filter fits perfectly between the front panel and the front fans. SPECIFICATIONS MATERIAL Steel / 4.0mm Tempered Glass MOTHERBOARD SUPPORT E-ATX (Under 280mm)/ATX/Micro-ATX/Mini-ITX FAN SUPPORT Top: 3 x 120mm / 2 x 140mm PSU Cover: 2 x 120mm / 2 x 140mm (Air Cooling mode) Front: 3 x 120mm / 2 x 140mm / 2 x 160mm Rear: 1 x 120mm / 1 x 140mm (Not compatible with UNI FAN SL-INF 140) PCIe Fan Bracket: 1 x 120mm RADIATOR SUPPORT Front: 360 / 280 / 240mm Top: 360 / 280 / 240mm Bottom: 240mm PSU SUPPORT LENGTH ATX (Under 220mm) GPU LENGTH CLEARANCE 392mm (max) CPU COOLER HEIGHT CLEARANCE 180.5mm (max) DRIVE Drive Cage?2 x 2.5” SSD + 2 x 3.5” HDD PSU Cover?2 x 2.5” SSD Behind MB tray: 2 x 2.5” SSD EXPANSION SLOT 7 I/O PORTS 1 x Power Button 1 x Reset Button 2 x USB 3.0 1 x USB Type C 1 x Audio 1 x Power Button 1 x Reset Button 2 x USB 3.0 1 x USB Type C 1 x Audio Fan Rim Lighting Effect Color Button Fan Rim Lighting Effect Mode Button 2 × USB 3.0 Fan Blade Lighting Effect Color Button Fan Blade Lighting Effect Mode Button INCLUDED FANS Front: 2 x 160mm PWM Fans Rear: 1 x 140mm PWM Fan Front: 2 x 160mm ARGB Fans Rear: 1 x 140mm PWM Fan DUST FILTERS 1 x Bottom

LIAN LI UNI FAN SL-INF 120 FAN INFINITY RGB x1 120MM BLACK Software controlled fan speed/ LED lighting Only one cable is required for a cluster of fans Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity 40 LEDs in each fan Quick PIN connection to provide ease of installation Low noise level at high RPM Infinity mirror look all around INFINITY MIRROR FAN A combination of the original UNI FAN SL and AL with a touch of infinity mirror, the SL-Infinity fans glow clear with multi-layer effects from any visible angle. CENTERED INFINITY MIRROR ARGB The circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart. SIDE FRAME ARGB Following the iconic angular lighting style of SL fans, the SL-Infinity fans have 2 thin LED strips on both sides of the fan blade. ALUMINUM TRIM SURROUNDED INFINITY MIRROR Surrounding aluminum trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the front ARGB lighting strip in a top and bottom pattern that creates a 3D indented look. REAR RIM OF LED AROUND THE ALUMINUM LOGO Inspired by AL fans, there is a bright ARGB rim of light around the LIAN LI logo at the rear. UNPRECEDENTED MODULARITY The 2nd generation of UNI FAN SL revisits the interlocking style that can connect up to 4 fans in a cluster and makes cable management simpler and improves compatibility with radiators fittings. DAISY CHAIN FAN A pin-to-pad contact point passes the signal and power through the fan cluster. REVERSIBLE CABLE MODULE The cable module is now placed at the center of the fan and can switch orientation to reduce clearance issues with the radiator inlet and outlet.

LIAN LI UNI FAN SL-INF 120 INFINITY RGB x3 pack WHITE + CONTROLLER Software controlled fan speed/ LED lighting Only one cable is required for a cluster of fans Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity 40 LEDs in each fan Quick PIN connection to provide ease of installation Low noise level at high RPM Infinity mirror look all around INFINITY MIRROR FAN A combination of the original UNI FAN SL and AL with a touch of infinity mirror, the SL-Infinity fans glow clear with multi-layer effects from any visible angle. CENTERED INFINITY MIRROR ARGB The circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart. SIDE FRAME ARGB Following the iconic angular lighting style of SL fans, the SL-Infinity fans have 2 thin LED strips on both sides of the fan blade. ALUMINUM TRIM SURROUNDED INFINITY MIRROR Surrounding aluminum trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the front ARGB lighting strip in a top and bottom pattern that creates a 3D indented look. REAR RIM OF LED AROUND THE ALUMINUM LOGO Inspired by AL fans, there is a bright ARGB rim of light around the LIAN LI logo at the rear. UNPRECEDENTED MODULARITY The 2nd generation of UNI FAN SL revisits the interlocking style that can connect up to 4 fans in a cluster and makes cable management simpler and improves compatibility with radiators fittings. DAISY CHAIN FAN A pin-to-pad contact point passes the signal and power through the fan cluster. REVERSIBLE CABLE MODULE The cable module is now placed at the center of the fan and can switch orientation to reduce clearance issues with the radiator inlet and outlet. IMPROVED PERFORMANCE The SL-Infinity 120 features a 10% performance optimization compared to the SL120 which results in better airflow (61.3 CFM), higher static pressure (2.66 mmH2O), and a larger range of fan speed (0, 200 ~ 2100RPM) at lower noise levels (29 dB(A)).

LIAN LI LANCOOL 205 MESH C MID TOWER RGB WHITE CASE Lian Li Lancool 205 Mesh C Mid Tower RGB Case White Model G99.OE764CW.00 A case powerful, still stylish strong and compact, radiators friendly on top and front, ease of use with removable mounting brackets. LANCOOL 205, the standard case with tempered glass that fits with maximum of ATX motherboard. LANCOOL 205M, the smaller case that can fit a maximum of Micro-ATX motherboard. LANCOOL 205 Mesh is the case improves the airflow and added in 2 ARGB PWM 140mm fan and one ARGB PWM 120mm fan. IMPROVED AIRFLOW Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system with filtration for the dust. EASY TO CHANGE, YOUR CALL LANCOOL 205 provides swapable top and front fan brackets that are friendly to mount fans and radiator, while the LANCOOL 205 MESH provides 1 for the top. SUPPORT ATX / M-ATX / Mini ITX DIMENSIONS 205 mm (W) x 415 mm (D) x 485 mm (H) MATERIAL Side panel: Tempered Glass Front panel: SPCC Mesh Panel Main structure: SPCC 0.6mm MOTHERBOARD SUPPORT ATX/M-ATX/Mini-ITX PSU SUPPORT 165mm(Max) INCLUDED FAN Front: 2 x 140mm ARGB PWM Fan Rear: 1 x 120mm ARGB PWM Fan FAN SUPPORT Top: 2 x 120/140mm Front:2 x 140mm Rear: 1 x 120mm RADIATOR SUPPORT Top:280mm Front:280mm DRIVE SUPPORT 4 x 2.5? SSD or 2 x 2.5? SSD+ 2 x 3.5? HDD GPU LENGTH CLEARANCE 350mm(Max) CPU HEIGHT CLEARANCE 160mm(Max) EXPANSION SLOT 7 I/O PORTS Power Button, LED Color Button, LED Mode Button, USB 3.0 x 2,Audio, Microphone, DUST FILTER 1 x Front Removable mesh panel 1 x Bottom Removable Dust Filter 1 x Top Magnetic Dust Filter

Lian Li LanCool 215W Tempered Glass White ATX Computer Case Model G99.LAN215W.00 (2 x200mm 800 RPM ARGB fans, 1x120mm 1000RPM fan) Unobstructed Airflow LANCOOL 215 features two pre-installed 200MM ARGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation. Equiped with two 200mm ARGB fan and one 120 fan at the rear. The mesh panel in the front creates a great airflow without bring the dust in. Include top and bottom honeycomb filtered vents, wide fan/radiator combination support, and multiple cable management solutions for the DIY users to fit their configuration. OPTIMIZED THERMAL MANAGEMENT MESH INTAKES SPANNING THE FRONT PANEL GUARANTEE SUFFICIENT AIRFLOW IN AND OUT OF THE SYSTEM. INCLUDED FANS Pre-installed fans ensure the case runs at peak performance. MULTI COOLING SYSTEMS SUPPORT Supports a maximum of 7 fans and radiators in various sizes and configurations. You make the call! Front Panel (interior) 3 x 120MM fans 2 x 140MM fans 280MM radiator with max 70MM thick 360MM radiator with max 70MM thick Top Panel 2 x 120MM fans 2 x 140MM fans 240MM radiator with max 55MM thick 280MM radiator with max 55MM thick Bottom Panel (on top of the PSU shroud) 2 x 120MM fans ULTIMATE COOLING SYSTEM SCENARIO With two 200MM fans mounted outside of the frame,you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario. Don’t worry about the fan screws, they won’t interfere with the radiator. OPTIMIZED THERMAL MANAGEMENT MOVE AIR STYLISHLY WITH ARGB EFFECTS Two 200MM fans are equipped with LED lights which create a dazzling effect through the mesh panel. EXPERIENCE ARGB CONTROL VIA ONE BUTTON The LED button located on the top controls 8 lighting modes and 7 colors through a simple click. HIGHLIGHTED LOGO The LIAN LI logo glows in sync with the fans ARGB SYNCHRONIZATION WITH THE MOTHERBOARD Pressing the LED button 3 seconds passes over the control of the LED lights to the motherboard, and press the button 3 seconds again to regain control of the lights. PLENTY OF SPACE FOR CABLE MANAGEMENT The 22MM thick space behind the motherboard ensures the cables fit in well. PRE-INSTALLED FAN HUB The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device. KEEP THE CABLE NICE AND NEAT The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Velcro straps, simplify cable management. STORAGE & MOTHERBOARD SUPPORT ROOM FOR 4 STORAGE DRIVES REMOVABLE/ADJUSTABLE CAGE SUPPORTS 2 X 3.5” HDD OR 1 X 3.5” HDD + 1 X 2.5” SSD 2 X SSD SUPPORT BEHIND THE MOTHERBOARD E-ATX MOTHERBOARD COMPATIBLE Fits motherboards with a maximum width of 280MM. SIMPLE DUST MANAGEMENT The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis. Moreover, the magnetic dust filter on the top and the removable full-length dust tray at the bottom protect the internal components from dust accumulation without impeding the airflow. Dimensions (D) 462mm x (W) 215mm x (H) 482mm Motherboard E-ATX(width: under 280mm)/ATX/M-ATX/ITX PSU 210mm Materials Steel 4.0mm tempered glass Incl Fans 2 x 200MM 3-PIN 800 RPM ARGB fans (front) 1 X 120MM 3-PIN 1100 RPM Fans (rear) Fan Support Front: 2 x 140mm or 3 x 120mm Top: 2 x 120mm or 2 x 140mm Top of PSU chamber: 2 x 120mm Radiator Front: 1 x 280/360mm Top: 1 x 240 / 280 mm VGA Length 370mm CPU Clearance 166mm Drive Behind MB Tray: 2 x 2.5? SSD Hard Drive Cage: 2 x 3.5? HDD or 1 x 2.5? SSD Slot 7 I/O Ports Power button Reset button LED button for lighting mode control 1 x HD AUDIO 2 x USB 3.0 Dust Filters 1 x Top (magnetic), 1 x Bottom (tray)

Born to push the limits LANCOOL II MESH Performance features a mesh front panel and mesh bottom left shroud panel, honeycomb vent design and built-in PWM fans, ensuring bountiful airflow delivered to your components while the system runs at peak performance. With the mesh front, LANCOOL II MESH making great airflow in the chasis, Packing three PWM fans, two front 140mm fans and one rear 120mm fan effectively cooling the component in user’s PC build and able to control by the botton on the I/O port. 9 drive mounting space and supports 384mm maximum GPU length and 176mm maximum hight clearence.Sollution for the cable management with double tempered glass to view the interior. THE ULTIMATE CHASSIS FOR BEGINNERS AND ENTHUSIASTS ALIKE Premium look Unprecedented modularity Hinged flip panels all around Optimized cooling support Cable management with ease Optimized storage configuration EXQUISITE STEEL CRAFTSMANSHIP Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system, allowing it to run at peak performance. MORE ADVANCED COOLING SUPPORT Optimized airflow is a result of the collaboration between the brand-new mesh design, additional exhaust vent holes, and three high-performance PWM cooling fans. HIGH-PERFORMANCE BUILT-IN PWM FANS 2 x 140mm PWM intake fans pre-installed at the front and 1 x 120mm exhaust fan in the back of the PERFORMANCE EDITION produce ample airflow, keeping your system running at peak performance. EXPERIENCE FAN CONTROL ON A WHOLE NEW LEVEL The four-mode fan controller on the top front allows you to experience fan control on a whole new level. Select L for casual use like internet browsing, press H when you’re pushing your GPU(s) and CPU hard. MODULAR PSU SHROUD COVER The space between the top and bottom chamber now features two removable PSU shroud covers to house either 2 x 2.5” SSDs or can be removed to fit 2 x 120mm fans. MULTI-WAY FAN/RADIATOR BRACKET The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your needs. OPTIMIZED STORAGE CONFIGURATION With the modular drive cage, side-mounted SSD bays, and additional SSD space on the modular PSU shroud cover, the LANCOOL II MESH is capable of holding up to 9 drives. SPECIFICATIONS Dimensions (D) 478mm x (W) 229mm x (H) 494mm Motherboard E-ATX(width: under 280mm)/ATX/M-ATX/ITX PSU 210mm Materials Steel 4.0mm tempered glass (both sides) Fan Support Front: 2 x 140mm or 3 x 120mm Top: 2 x 120mm or 2 x 140mm Top of PSU chamber: 2 x 120mm Radiator Front (multi-way fan/radiator bracket): 1 x 360/280/240mmTop: 1 x 240mm (aligned to the left) VGA Length 384mm CPU Clearance 176mm Drive Behind MB Tray: 2 x 2.5? SSDBehind the right flip panel: 2 x 2.5”SSD Hard Drive Cage: 3 x 3.5? HDD/2.5? SSD Above PSU Chamber: 2 x 2.5? SSD Slot 7 I/O Ports 1 x Fan speed control button1 x TRRS AUDIO 2 x USB 3.0 1 x USB 3.1 TYPEC Dust Filters 1 x Top (magnetic), 1 x Bottom (tray) Incl Fans 2 x 140mm PWM Fan (front) Rated Speed:600 ±200 (30% Duty)-1200RPM ±10% Air Flow:60.56CFM Noise:25.8dB(A)1x 120mm PWM fan (rear) Rated Speed:600 ±200 (30% Duty)-1500RPM ±10% Air Flow:54.6CFM Noise:26.1dB(A)

Feature multi-directional power button and movable IO module Front and side tempered glass panels for components and RGB display Supports up to 3x 360 radiators and a maximum of 10 fans Offers 9 storage drives mounting space Dual-chamber layout with hooks friendly cable management compartment Five optional accessories: Vertical GPU Kit / Upright GPU Kit / Additional I/O kit / Front Mesh Kit / Top I/O Kit THE MODERN BLACK The O11 Dynamic series classic tinted glass and brushed aluminum panel are once again combined in proper proportion. – Brushed Aluminum – Black Coated Mesh Panel – Tinted Tempered Glass VERSATILE ORIENTATION With only a few steps, the O11D EVO can be flipped in reverse mode to experience a seamless front and side tempered glass showroom view on the right side of the chassis. EXQUISITE, YET FUNCTIONAL Following the style of the O11 Dynamic series, the aluminum panels feature an updated fine mesh which provides an optimal ratio of airflow and dust filtering. INNOVATIVE AND FLEXIBLE CONFIGURATION Featuring a modular design, the O11D EVO offers many configuration potentials when making use of optional kits, both for air cooling and water cooling. SPACIOUS COOLING SUPPORT The O11D EVO features sufficient space to accommodate 3x 360mm radiators, and up to 10 fans. MASSIVE STORAGE CAPACITY Multiple easily accessible storage mounting points are provided to support up to 9x SSDs or 6x HDDs + 3x SSDs. CLEAN LOOK The O11D EVO keeps the front panel as clean as possible with a multi-directional power button that can be pressed from both the front and the side of the chassis. PERSONALIZED ARGB LIGHTING STRIP The front panel LED strip features 7 built-in lighting effects which can be controlled via the M button. An 8th mode is available to enable motherboard software synchronization or L-Connect control. FRIENDLY BUILDING PROCESS EASILY REMOVABLE PANELS The new mechanism to mount the side panels simplifies the process to reach the interior of the case by eliminating the need to first open the top panel. EFFORTLESS CABLE MANAGEMENT The O11D EVO optimizes the user’s ability to cable manage their system with a dual-chamber design and a removable bracket. RELOCATABLE I/O PORT At the bottom of the chassis, the I/O module can be relocated to 3 different locations without the use of any tools. POTENTIAL FOR DUAL PSU The drive cage can be removed to make place for a second PSU, or be switched to a lower position. ANTI-SAG BRACKET FOR PERFECTLY HORIZONTAL GPU The GPU anti-sag bracket is included for displaying hardware through the seamless front and side tempered glass panels. IN COLLABORATION WITH DER8AUER In continuation of the O11D family, LIAN LI has collaborated with Der8auer and the community to finalize the O11D EVO design. Thanks to his contribution, a LIAN LI badge with De8auer’s name is provided. Users can place it on the cable management bar in their desired orientation. SPECIFICATIONS DIMENSION (D)465mm × (W)285mm × (H)459mm MATERIAL 4mm Aluminum 4mm Tempered Glass 1mm Steel Structure MOTHERBOARD SUPPORT E-ATX (width: under 280mm)/ATX /M-ATX/ITX PSU SUPPORT 220mm FAN SUPPORT Top: 120mm × 3 or 140mm × 2 Side: 120mm × 3 or 140mm × 2 Bottom: 120mm × 3 or 140mm × 2 Rear: 120mm × 1 On Drive Cage: 60mm × 1 RADIATOR SUPPORT Top: 360mm × 1 or 280mm × 1 *Total max thickness: 87.5mm Side: 360mm × 1 or 280mm × 1 *Inner scenario total max thickness: 83mm(120mm fan on top and bottom) 63mm(140mm fan on top and bottom) *Outer scenario total max. thickness? 120mm(120mm fan on top and bottom) 100mm(140mm fan on top and bottom) Bottom: 360mm × 1 *Total max thickness: 87.5mm DRIVE SUPPORT Bottom?2.5” SSD × 4 or 3.5” HDD × 2 Side?2.5” SSD × 4 or 3.5” HDD × 2 Drive Cage?2.5” SSD × 3 or 3.5” HDD × 2 + 2.5” SSD × 1 Cable Management Bar?2.5” SSD × 2 *Only 9 sets of 2.5” SSD mounting pads are provided GPU LENGTH CLEARANCE 426 mm CPU HEIGHT CLEARANCE 167 mm EXPANSION SLOTS 8 I/O PORTS 2 × USB 3.0 1 × USB 3.1 TYPE-C, 1 × HD AUDIO/ MIC LED Color and Mode button Reset Button Power Button DUST FILTER Bottom × 1

Mid-tower chassis with two modes: Normal Mode/ Reverse Mode Feature multi-directional power button and movable IO module Front and side tempered glass panels for components and RGB display Supports up to 3x 360 radiators and a maximum of 10 fans Offers 9 storage drives mounting space Dual-chamber layout with hooks friendly cable management compartment Five optional accessories: Vertical GPU Kit / Upright GPU Kit / Additional I/O kit / Front Mesh Kit / Top I/O Kit The Pure White Fulfill your dream’s all-white build with a completely white chassis, down to the smallest detail. – White Coated Mesh Panel – Clear Tempered Glass – Aluminum with white powder coating – Snow White Interior – Silver screws – Light Grey Rubber Grommets – White Dust Filter VERSATILE ORIENTATION With only a few steps, the O11D EVO can be flipped in reverse mode to experience a seamless front and side tempered glass showroom view on the right side of the chassis. EXQUISITE, YET FUNCTIONAL Following the style of the O11 Dynamic series, the aluminum panels feature an updated fine mesh which provides an optimal ratio of airflow and dust filtering. INNOVATIVE AND FLEXIBLE CONFIGURATION Featuring a modular design, the O11D EVO offers many configuration potentials when making use of optional kits, both for air cooling and water cooling. SPACIOUS COOLING SUPPORT The O11D EVO features sufficient space to accommodate 3x 360mm radiators, and up to 10 fans. MASSIVE STORAGE CAPACITY Multiple easily accessible storage mounting points are provided to support up to 9x SSDs or 6x HDDs + 3x SSDs. CLEAN LOOK The O11D EVO keeps the front panel as clean as possible with a multi-directional power button that can be pressed from both the front and the side of the chassis. PERSONALIZED ARGB LIGHTING STRIP The front panel LED strip features 7 built-in lighting effects which can be controlled via the M button. An 8th mode is available to enable motherboard software synchronization or L-Connect control. FRIENDLY BUILDING PROCESS EASILY REMOVABLE PANELS The new mechanism to mount the side panels simplifies the process to reach the interior of the case by eliminating the need to first open the top panel. EFFORTLESS CABLE MANAGEMENT The O11D EVO optimizes the user’s ability to cable manage their system with a dual-chamber design and a removable bracket. RELOCATABLE I/O PORT At the bottom of the chassis, the I/O module can be relocated to 3 different locations without the use of any tools. POTENTIAL FOR DUAL PSU The drive cage can be removed to make place for a second PSU, or be switched to a lower position. ANTI-SAG BRACKET FOR PERFECTLY HORIZONTAL GPU The GPU anti-sag bracket is included for displaying hardware through the seamless front and side tempered glass panels. IN COLLABORATION WITH DER8AUER In continuation of the O11D family, LIAN LI has collaborated with Der8auer and the community to finalize the O11D EVO design. Thanks to his contribution, a LIAN LI badge with De8auer’s name is provided. Users can place it on the cable management bar in their desired orientation. SPECIFICATIONS DIMENSION (D)465mm × (W)285mm × (H)459mm MATERIAL 4mm Aluminum 4mm Tempered Glass 1mm Steel Structure MOTHERBOARD SUPPORT E-ATX (width: under 280mm)/ATX /M-ATX/ITX PSU SUPPORT 220mm FAN SUPPORT Top: 120mm × 3 or 140mm × 2 Side: 120mm × 3 or 140mm × 2 Bottom: 120mm × 3 or 140mm × 2 Rear: 120mm × 1 On Drive Cage: 60mm × 1 RADIATOR SUPPORT Top: 360mm × 1 or 280mm × 1 *Total max thickness: 87.5mm Side: 360mm × 1 or 280mm × 1 *Inner scenario total max thickness: 83mm(120mm fan on top and bottom) 63mm(140mm fan on top and bottom) *Outer scenario total max. thickness? 120mm(120mm fan on top and bottom) 100mm(140mm fan on top and bottom) Bottom: 360mm × 1 *Total max thickness: 87.5mm DRIVE SUPPORT Bottom?2.5” SSD × 4 or 3.5” HDD × 2 Side?2.5” SSD × 4 or 3.5” HDD × 2 Drive Cage?2.5” SSD × 3 or 3.5” HDD × 2 + 2.5” SSD × 1 Cable Management Bar?2.5” SSD × 2 *Only 9 sets of 2.5” SSD mounting pads are provided GPU LENGTH CLEARANCE 426 mm CPU HEIGHT CLEARANCE 167 mm EXPANSION SLOTS 8 I/O PORTS 2 × USB 3.0 1 × USB 3.1 TYPE-C, 1 × HD AUDIO/ MIC LED Color and Mode button Reset Button Power Button DUST FILTER Bottom × 1

LIAN LI GALAHAD II TRINITY SL-INF 360 WHITE CPU LIQUID COOLER 3 interchangeable pump looks that can be customized with L-Connect 3 Factory installed with ARGB daisy-chainable radiator fans or UNI FAN SL-INF Pump motor speed goes up to 3200RPM Includes a newly designed copper plate and creates straightened Liquid coolant pathway 45-degree tubing connector with tubes’ inner diameter increased to 7mm CHOOSE PREFERABLE LOOK The Galahad II Trinity series’ pump cap has three interchangeable designs, each with a unique look and two rings of colors that can be individually controlled with different lighting effects. HIGH DENSITY ALUMINUM RADIATOR This 27mm thick radiator features single-wave radiator fins with 20 FPI (fins per inch), which is less airflow restrictive and can result in greater thermal performance. DAISY-CHAINABLE ARGB FAN The ARGB PWM fans can be daisy-chained by a single short cable which can be hidden inside the frame of the fan. The 120mm fan is 25mm thick and is equipped with fluid dynamic bearings for stable and quiet operations while effectively providing airflow to the radiator. Maximum Static Pressure 3.26 mmH2O Maximum Airflow 79.9 CFM MOUNT IN ANY WAY This innovative 45° tubing connector gives the tubes the freedom of 360° rotation, allowing the Galahad ll Trinity series to be installed in many different ways. The Galahad ll Trinity series can be flexibly installed in ways such as: INSTALATION MADE EASY, FOR YOU The Galahad II Trinity series introduces redesigned mounting backplates to provide a hassle-free installation to users while maintaining compatibility with most mainstream CPU sockets. The backplates have a one-piece design with fixed struts to make installation easier. SEAMLESS SOFTWARE​ Control and preview with precision the lighting effect and real time motor speed of the Galahad II Trinity Pump and fans with the L-Connect 3.